Flashing a phone at home Lenovo. Firmware for Lenovo IdeaPhone P780 smartphone. Flashing via computer

02.06.202327.05.2017

Lenovo A319 is an inexpensive but rather impractical phone. This device often has the following bug: when turned on, it may begin to reboot endlessly or may not load beyond the Lenovo branded inscription that welcomes the user. But in fact, these problems are easily solved by changing the smartphone firmware. In this article you will learn

What software will you need?

Third, you need to go to the Scatter File section and find the downloaded firmware file in the system. It is likely that it will be signed as “*smartphone processor model (for example, MT6572)*android_scatter”.

The fourth step is to wait until the firmware is loaded into the program.

Fifth, you need to find the DA DL All with check sum block. This is necessary in order to give a command to the program that the firmware will be installed on the phone without a battery. Once again, you should pay attention to the very first step of the instructions.

Sixth, go to the “Format” item, where you need to check the Auto Format Flash and Format whole flash boxes. You need to click “Okay” and connect your smartphone via a USB cable to your computer.

The processor will perform the seventh action itself. It will format the smartphone. After completing the initialization and disk partitioning process, you need to disconnect the smartphone from the cord and click on the Download button.

Eighth, you need to connect the USB cable to your phone and computer. If the Lenovo driver has not been installed, the system will either display an error (and then you will have to install it manually), or will try to find and install it itself.

Ninth - the process of downloading new firmware to the smartphone has begun. As soon as it is installed, the program will show a small window with a green circle - the flashing is complete. Now you have learned how to flash Lenovo A319.

Bottom line

Finding out how to flash a Lenovo A319 was not difficult. Moreover, the flashing process itself took very little time (on average, eleven minutes). But that’s not all: other smartphones are reflashed using the same principle. However, you should not think that the firmware is installed the same way on all devices. Each manufacturer has its own system programming features that must be taken into account when reinstalling the firmware on a smartphone. For example, in the case of Lenovo A319, this is preliminary removal of the battery in order to successfully change the operating system of the device.

This should always be taken into account so as not to turn your smartphone into a “brick”.

Most owners of ultra-fashionable smartphones or a Lenovo smartphone model tb2 tab 2 16 on an operating system with a dpi screen believe that it is impossible to change the firmware in these gadgets on their own, but they are deeply mistaken.

The reasons why you need to flash a phone, a Lenovo smartphone model tb2 tab 2 16 on an operating system with a dpi screen, are very varied: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after an unsuccessful installation, or you just wanted to install the latest firmware version.

Firmware Flashing Lenovo a1000, s1 lite, a6010 and other models.

- You can do the firmware yourself on all phones, Lenovo smartphone model tb2 tab 2 16 on an operating system with a screen - dpi.

In addition to the topic of firmware on Android smartphones, there is a review article: . It describes in detail, there is a video instruction on how to reflash a mobile device to Android kit kat.

In what cases should you update the firmware of smartphones, Lenovo smartphone model tb2 tab 2 16 on an operating system with a screen - dpi and for other models:

If the phone does not turn on, although the reason may not be in the firmware;

If the phone constantly glitches and reboots;

If the firmware is unsuccessful and the phone needs to be returned to its original state;

If you need to install the latest, most modern firmware version;

Download firmwares, programs, flashers and Lenovo firmware.

Download free firmware for Lenovo phone from your computer.

- the official website of the cell phone manufacturer Lenovo, for the following models s1 lite, a6010, tab 10 and others. By clicking on the link, you can enter the name and model code into the search and download software and firmware, for example for Lenovo s1 lite, a6010, tab 10, where you can also download RU, software and driver for free on your mobile device. The search for software, first of all, should always be carried out on the official website of the electronics manufacturer; the most current and latest firmwares for the Lenovo a7600 h phone with a dpi screen and other models with other characteristics are always there.

Instructions for Lenovo firmware.

How to properly flash a smartphone. Instructions for firmware using the example of a Lenovo p2, a7600 h phone.

On your smartphone, go to Settings->Developer options and enable USB debugging.

We connect the USB cable from the phone to the computer and install the firmware.

Disconnect the phone from the computer, turn it off and remove the battery.

We launch the SP Flash Tool program on the computer, it is needed to upload new firmware to the phone.

In the program window, click the Scatter-loading button and in the window that opens, select the file MT6589_Android_scatter_emmc.txt (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for the update.

Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).

Now click the Download button. We answer “Yes” to any pop-up messages.

We connect the smartphone (using a USB cable) to the computer, the new firmware will begin to be uploaded to our device automatically.

When the process is complete, a window with a green circle will appear. You can disconnect your phone from your PC and turn it on.

For more information on how to do this, see the video instructions:

To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out your phone model and firmware version by typing the code in your phone *#0000# .

Instructions for flashing Lenovo p2, a7600h

One more example. Instructions for flashing firmware for Lenovo p2, a7600 h mobile phone.

Firmware for Lenovo p2, a7600 h phone: download firmware for

Firmware Lenovo p2, a7600h

1. To update the firmware on Lenovo p2, a7600 h, you need to download the firmware from the link above, the Smart Phone Flash Tool loader and USB firmware.

2. Turn on the phone, connect the USB cable and install the firmware.

3. After installing the firmware, turn off the device.

4. Run the loader program "Flash tool.exe".

5. Click “Download Agent” and select the “MTK AllnOne DA.bin” file (in the downloader folder).

6. Click “Scatter-loading” and select the file “MT6573 Android scatter.txt” (in the folder with the firmware).

7. Uncheck “PRELOADER”, click on “Download” and connect the USB cable.

8. After loading the firmware, the bootloader will show the software installation status.

Note: When you connect your phone, the program should see it and start flashing the firmware. If the phone is not detected, then disconnect it from the computer, remove and insert the battery and reconnect it to the computer

Instructions for flashing Lenovo from the mobile version of the site.

And another example of firmware for a Lenovo p2, a7600 h smartphone. Other phone models are flashed similarly. The main thing is to find the right firmware for your phone model. You can find them on the Internet via Yandex. I can also recommend a good site with firmware

So, we take the Lenovo p2, a7600 h firmware as an example.

The first thing you need to do is download the firmware itself. It is presented as an archive in zip format. There is no need to unpack it, since you can reset it to an external storage medium, that is, an SD card.

The next thing to do is turn off the phone and fully charge its battery. After the battery is fully charged, you need to remove the charger and take out the battery, and after about 30-40 seconds put it back into the phone.

Next, press the power button and hold it for 1-2 seconds, while simultaneously pressing the key that decreases the volume. These two buttons must be held until the manufacturer's logo appears on the phone screen - Lenovo p2, a7600 h. After this, you need to release the on/off key, but you must hold down the volume down until the Android logo appears. After it appears, you need to release the volume button and press up once, that is, increase the volume. We use the same button when moving through menu items, and select the required option with the power key. Select the menu item “apply update from external storage”, then select the archive that was saved to the external storage medium.

This completes the Lenovo p2, a7600 h firmware. As you can see, there is nothing difficult in the process of installing an operating system on a phone and you can actually do it yourself, without resorting to the paid services of service centers or self-taught “handicraftsmen”.

But it should be noted that in case of incorrect actions when flashing the phone, it can be irrevocably damaged, turned into a “brick” - a useless and good-for-nothing piece of plastic and iron. Therefore, if you are not confident in your abilities, then it is better to entrust the flashing of a mobile phone or tablet to experienced programmers from an electronics repair service.

It is best to download firmware for modern Lenovo models from the official website of the phone manufacturer; this can be done by clicking on the link: download

To download proprietary software, use the link: official website firmwares. Here is a description of how to find a driver for your phone.

Using the link posted above in the text, you can download for free and read a description of how you can make firmware for the Android phone Lenovo p2, a7600 h and other models. This page contains a video review and instructions on how you can reflash your smartphone yourself; here you can download the firmware for your phone for free through the official website.

How to independently flash Android on a Lenovo p2 phone model on the OS platform on the screen with resolution, type, program on a computer Instructions for flashing, download and change the firmware on a Lenovo 7 phone, tab 2 30, tb2 tab 2 16, tab4 tab 4 plus tb, tab3 tab 3, p2, a7600 h, k6 note power, a1000, s1 lite, a6010, tab 10, shoot shot, 4 10 plus 64, k5, x304l 64gb, c2 power, tb3, zuk, phab 2, s 50, tb x704l, p1ma40 8gb 32, k 5, s 1, 2 a10 70l, p1m, ideacentre aio, yoga 2gb, essential, z90a40, a5500, y720 4g, tb 4 8504x, x x3, 730x, a859, a369i, a316i, 850m, pb2, k10a40, p770, a660, p700i, a789, ideaphone s720 grey, P780 4Gb, Sisley S90 32Gb, A2010, P70, A536, S850, A319, S60, Vibe Shot, K3 Note, g580, 70, s660, vibe x2, vibe z2, a7, g570, a5000, b50, a328, s860, a6000, s820, g50, b590, a7600, a8, a916, tab 2 a10, vibe p1, vibe pro, a2109, s2109, k1, thinkpad tablet 2, ideatab a2107 16gb 3g, yoga, ideatab s2110, s2109a, ideapad a1, a2109a, windows 8, a2107ah, s890, k900, a820, 720, s880, ideaphone a800 black, a690 black, 770, 800, a2107a for free through the official website.

Popular reviews on Lenovo

	It is possible to download pictures for free on such types of Lenovo phones as simple and touch, for different OS, registration is not required.
	Where can I download free ringtones or listen to music on my Lenovo phone?
	The social network vk.com is the most visited network in our country. Initially, you could only use the network on a computer; 10 years ago there were no phones with a touch screen, much less Lenovo tablets.
	Where to download and how to install the application for free - Traffic Rules with questions and answers and explanations on Lenovo

Installing new firmware on a phone is a responsible matter and requires preliminary preparation. You can reflash Lenovo a319, a916 and other smartphones in several ways, using the Recovery menu or special programs on your computer. Let's look at where it is better to download firmware for Android on Lenovo and how to install it correctly on a mobile phone.

Android OS firmware on Lenovo smartphones may be needed in different situations. For some, their mobile phone began to glitch and reboot spontaneously, while others were tired of the standard personalization settings. Regardless of what exactly prompted you to reflash, you need to carefully read the step-by-step instructions for its implementation. It is also worth noting that most Lenovo smartphones are equipped with MTK brand processors and have their own features, which we will mention below.

Download the required firmware version

The first place to start flashing a smartphone at home is by searching for the latest firmware version. If you try to install the wrong version, the smartphone will, at best, work with limited functionality and system errors. After all, each firmware also contains software drivers for all the main hardware modules of the device: camera, speakers, radio module, etc. If they are incompatible with the components used in the phone, then they will not work either.

It is best to look for custom firmware versions on thematic websites and forums. For example, you can download free firmware for smartphones such as: Lenovo a859, a319, note k50 and many other models. Before downloading them, be sure to read the installation instructions in Russian and compatibility with your mobile phone. As a rule, the firmware is downloaded as a zip archive in one file, which later needs to be placed on the phone’s memory card or on a PC.

Reflash via modified Recovery

Through stock Recovery, only official firmware versions can be installed on Lenovo smartphones. This is also not bad, but in most cases, they are flashed to custom firmware, which cannot be installed in the usual way. To download them, you must first reflash the Recovery menu itself on Android. Coping with this task is not so difficult, all you need is:

Unlock the bootloader and enable USB Debugging on Android.
Download Android SDK Platform Tools.
Download the desired version of Recovery and save the file in .img format on your computer. We recommend downloading TWRP from the developer's official website.
Turn off the phone, go into fastboot mode, and then connect it to the computer via a USB cable.
Open a command window by first navigating to the directory where the Android SDK Platform Tools folder is located.
Type the command fastboot flash recovery“path to recovery file” and press the enter button.
After a notification about the successful installation of Recovery appears on the screen, you can disconnect your smartphone from the computer and try to start it.

Now you can proceed directly to installing the new firmware. To do this, first write the desired archive onto a memory card and insert it into the smartphone. Next, turn off the mobile phone again and do the following:

We go into custom recovery. To do this, with the smartphone turned off, press the key combination volume up/down + lock/off button. In the Recovery menu, navigation is carried out using the same volume buttons, and confirmation of the action is carried out using the lock key. But if the TWRP control is touch-sensitive, as in the menu of the mobile phone operating system.
We clear data and cache. To do this, select the item wipe - data - wipe cache - wipe dalvik cache.
We install the firmware. To do this, click on the Install zip from sd card button, select the desired archive and wait for the process to complete.

For more information about the method of installing custom Recovery on Lenovo a328, s860, a369 and others smartphones, see the video below.

Flashing using the SP FlashTool computer utility

You can flash smartphones with MTK brand processors, including Lenovo, using the SP FlashTool program. Its advantage is its accessible interface and support for almost all current phone models. Before flashing a mobile phone via a computer, you need to download one of two versions of the program, FlashTool 3 or 5. Their difference is not only in the updated interface design, but also in compatibility with a certain type of phone. The 3rd version is better suited for older models, and the 5th - for new ones.

Firmware via computer utility

Before installing the firmware, you need a few small preparations, a fully charged mobile phone battery, a working USB cable and a computer with Windows XP/7/8 installed. You also need to download a zip archive with firmware to your PC. After that, you can proceed directly to installing it on your phone, to do this:

Download and install the required drivers on your PC. Note that special firmware drivers are needed for the SP FlashTool program, and not those that come standard when connecting a mobile phone to a computer. You can find them on the same thematic forums and sites with firmware.
Download the SP FlashTool program from the official website and install it on your PC.
In the program window, click on Scatter-loading and select the scatter file that is located with all the firmware files.
Go to the options section and in the download line check the DA DL All with Checksum box.
We connect the phone to the computer via a USB cable.
To start the installation process, go to the Download tab, select Download Only or Firmware Upgrade and click on the green rectangle.
We wait for the process to complete, after which a large green checkmark will appear on the computer screen. After this, you can disconnect the smartphone and turn it on.

Lenovo firmware process

When flashing, do not remove the USB cable from the phone or PC. Also, you do not need to turn on the phone or interact with it in any way. This can lead to incorrect installation of the firmware, as a result of which the phone will malfunction or not turn on at all.

Lately, developers have been actively offering their users more and more updates for smartphones and other tablet devices. They can be installed thanks to a firmware update. Unfortunately, despite all the positive aspects of the update, not everyone will like the new version of the system.

Sometimes, after installing updates, unwanted effects appear or the device performs worse than before. Therefore, the question arises of how to return the old firmware.

It is important to understand that all actions carried out with mobile devices, smartphones or tablets can harm it, and all articles on this topic are for informational purposes only. It should also be noted that updating the firmware or downgrading to an older version may result in the loss of contacts or other information (optional) that is stored on the device.

If the question arises of how to return the old firmware or install a new one, then you need to perform a number of simple operations.

0. Turn off the smartphone.
1. Install drivers for the device firmware (you can download it here - click here). This is done by connecting the smartphone to the computer.
2. Find the required firmware version. This can be either a new or an old version. It is downloaded to your computer and unpacked. Preferably on the C:\ drive in the Firmware folder
(firmware can be downloaded from)
3. Install the SP Flash Tool program. It allows you to download firmware to your phone. Most often it is provided along with the firmware in one archive. Let's launch it.

3.a. Click on Download Agent, as well as Scatter-loading File. Select the required files.

3.b. Don't forget to mark DA DL All With Check Sum

3.s. Click Firmware - Upgrade. If, suddenly, an error appears and the firmware does not start, then click Download.

3.d. We connect the smartphone to the computer and wait for the firmware to download.

4. Flash your phone using your computer. To do this, turn off the device, launch the SP Flash Tool, and fill in all fields. It is important to pay attention to the DA DL All With Check Sum field; there should be a checkmark next to it. After that, check all the fields again and click update.
5. Next, you need to connect the switched off phone to the computer.

If everything is done correctly, colored stripes appear in the lower area of the utility. They show how the firmware is uploaded. When the update is completed successfully, a window with a green circle appears.

When it appears, disconnect the device from the computer and turn it on. The first download will take longer and may take up to 5 minutes. Do not touch the phone or try to turn it off. Remember that only the first boot will take this long.

If you are not sure about something or don’t know, then it’s better to ask here or on 4pda. It’s better to measure 100 times and cut once than to rebuild your smartphone later!

Smartphones produced by Lenovo, over the years of their existence, have occupied quite a large part of the market for modern gadgets. Even the manufacturer’s solutions purchased quite a long time ago, and among them the successful model A526, continue to properly perform their functions. Only their software part can cause some disappointment to the user. Fortunately, with the help of firmware, this situation can be corrected to some extent. The article discusses the most effective ways to reinstall Android on Lenovo A526.

By following fairly simple instructions, you can restore the functionality of a Lenovo A526 that has lost the ability to start normally, as well as add some additional functionality using updated software. At the same time, before moving on to manipulating the device, you must consider the following.

Any procedures on smartphone memory sections carry certain risks. The user carrying out the firmware takes full responsibility for the consequences! The creators of the resource and the author of the article are not responsible for possible negative results!

As with any other Lenovo model, before carrying out the A526 firmware process, you need to carry out some preparatory manipulations. Clearly and correctly carried out preparation will allow you to avoid mistakes and difficulties, and will also predetermine the success of the event.

Driver installation

In almost all situations where it is necessary to restore or update the software of a Lenovo A526 smartphone, it will be necessary to use the SP Flash Tool utility, as one of the most effective tools for working with memory partitions of MTK devices. And this presupposes the presence of a special driver in the system. The steps you need to go through to install the necessary components are described in the article:

The package with the necessary drivers can be downloaded from the link:

Creating a backup

When flashing Android smartphones, the device's memory is almost always cleared, which entails the loss of user information, so a backup copy is necessary, which can be created using one of the methods described in the article:

When working with Lenovo A526, special attention should be paid to the partition backup procedure "nvram". A dump of this partition, created before the firmware and saved in a file, will help save a lot of time and effort when restoring the functionality of wireless networks that were disrupted in the event of an unsuccessful Android installation or due to other errors that arose during the process of manipulating the system partitions of the device.

Firmware

Writing images into the memory of Lenovo MTK smartphones, and the A526 model is no exception, is usually not difficult if the user correctly selects the versions of the programs used and the options for the files used. Like many other devices, Lenovo A526 can be flashed in several ways. Let's look at the main and most frequently used ones.

Method 1: Factory recovery

If the purpose of the firmware is the usual reinstallation of the official version of Android, cleaning the smartphone from various software debris and returning it to its “out of the box” state, at least in terms of software, probably the easiest method of performing manipulations will be to use the recovery environment installed by the manufacturer.

Method 2: SP Flash Tool

Using the SP Flash Tool program to flash the firmware of the device in question is perhaps the most universal method of restoring, updating and reinstalling software.

Due to the rather long period of time that has passed since the smartphone was discontinued, software updates are not being released by the manufacturer. The A526 model is not included in the plans for releasing updates on the manufacturer’s official website.

It is worth noting that few software updates were released during the life cycle of the device.

With the help of the instructions below, it becomes possible to write the official firmware into the memory of a device that is in almost any state, including inoperative, due to the crash of Android or other software problems.

The first thing you need to take care of is downloading and unpacking the latest version of the official firmware, intended for writing to the device through the program, into a separate folder. To do this you can use the link:
Due to the presence of not the latest hardware components in the smartphone, operations with its memory will not require the latest version of the utility. Proven solution - v3.1336.0.198. Downloading the archive with the program, which will then need to be unpacked into a separate folder, is available at the link:
After preparing the necessary files, you should launch the SP Flash Tool - to do this, just double-click with the left mouse button on the file Flash_tool.exe in the directory with the program files.

After launching the program, you will need to add a special scatter file containing information about the smartphone memory sections and their addressing. The button is used for this. Then the path to the file is specified MT6582_scatter_W1315V15V111.txt, located in the folder with the unpacked firmware.

After the above steps, the fields containing the names of the device’s memory sections and their addresses are filled in with values.

After checking that all checkboxes next to the section names are ticked, click the button "Download", which will put the SP Flash Tool into standby mode for connecting the device.

The smartphone is connected to the USB port with the battery removed.

The process of recording information will begin automatically after the device is identified in the system. To do this, you need to install the battery in the device connected to the PC.
While the program is running, you cannot disconnect the device from the PC and press any keys on it. The progress of the firmware process is indicated by a filling progress bar.

Upon completion of all necessary procedures, the program displays a window "Download OK", confirming the success of the operation.

If errors occur while the program is running in mode "Download", you should disconnect the device from the PC, remove the battery and repeat the above steps, starting from the sixth, but instead of the button "Download" in this step press the button "Firmware->Upgrade".

After successfully writing the software to the device, you need to close the confirmation window in the SP Flash Tool, disconnect the smartphone from the PC and launch it by long pressing the button "Nutrition". The startup after reinstalling the software takes quite a long time and should not be interrupted.

Method 3: Unofficial firmware

For those owners of Lenovo A526 who do not want to put up with outdated Android 4.2.2, and this is the version of the OS that everyone who installs the latest official firmware in a smartphone receives, installing custom firmware may be a good solution.

In addition to upgrading the system version to 4.4, this way you can slightly expand the functionality of the device. There are quite a large number of unofficial solutions for Lenovo A526 available on the World Wide Web, but unfortunately, most of them have significant drawbacks, which makes it impossible to use such custom ones on an ongoing basis.

According to user experience, the most interesting from the point of view of stability and functionality for the Lenovo A526 are the unofficial solutions MIUI v5, as well as CyanogenMod 13.

There are no official versions from the development teams, but ported firmware carefully created and brought to a good level of stability can be recommended for use. One of the assemblies can be downloaded from the link:

Thus, understanding the procedure for installing system software in the Lenovo A526 is not as difficult as it might seem at first glance. Whatever the purpose of the firmware, you should follow the instructions carefully. If any failures or problems occur, do not panic. We simply use method No. 2 of this article to restore the functionality of the smartphone in critical situations.